Material Lift Rental NYC

Material lift and duct lift rental in NYC from our Brooklyn yard: Genie and Sumner lifts, duct lifts and a drywall lift that raise duct, pipe, unit heaters, drywall and fixtures from 11 to 25 ft, so one worker can hold the load while they fasten it. Pick up at 181 2nd Ave, Brooklyn, or get same-day or next-day delivery to all five boroughs when the lift is available. Call 718-344-1474 or request a quote.

Showing all 10 results

Material lift models compared

Max height is how high the forks or cradle go. Fork style lifts reach about 2 ft higher with the forks turned up. Figures come from the manufacturer; tap a model for full specifications.

ModelMax heightCapacityWeightStowed heightBest for
Genie GL-1011 ft 8 in350 lb149 lb6 ft 6.5 inLow ceilings, no power on site
12 ft drywall lift12 ftOne drywall sheetAsk usAsk usHanging drywall on ceilings and high walls
Genie GL-1213 ft 9.5 in350 lb154 lb7 ft 7 inCeilings up to about 14 ft
Sumner Series 240012 ft 11 in or 16 ft 11 in (forks up), by model450 lb195 to 243 lb5 ft 3 inFits a van or SUV and small elevators
Sumner 201514 ft 3 in (16 ft 2 in forks up)800 lb331 lb6 ft 4 inPipe, duct and doors in commercial ceilings
Genie SLC-18 duct lift18 ft 6 in650 lb307 lb7 ft 2 inRound and square duct runs
Sumner 2020 (18 ft)18 ft 10 in (20 ft 10 in forks up)800 lb378 lb6 ft 4 inMechanical and electrical work
Sumner 202523 ft 5 in (25 ft 5 in forks up)650 lb420 lb6 ft 4 inWarehouse, gym and lobby ceilings
Sumner Series 2500About 10 to 25 ft, by model650 to 1,000 lb644 to 785 lbBy modelLifting flush to a wall or truck bed (no front legs)
Sumner Roust-A-Bout15 to 25 ft, by model1,500 lb330 to 493 lbBy modelHeavy pipe, beams, pumps and motors

Which material lift do I need?

Pick by height first, then check the load against the tips below. Our duct lift vs material lift guide goes deeper.

  • Height: measure to the bottom of the hangers or the ceiling, not just the room height, and pick a lift that reaches past it. The GL-10 covers 9 to 10 ft ceilings, the GL-12 covers up to about 14 ft, the Series 2400 and Sumner 2015 up to about 16 ft, the 18 ft lifts cover most stores and lobbies, and the Sumner 2025 reaches 23 to 25 ft.
  • Drywall: for full sheets on ceilings up to 12 ft, use the drywall lift, which holds the sheet flat and tilts.
  • Against a wall: the Series 2500 has no front legs, so the forks roll right up to a wall, a truck bed or a machine.

NYC job site tips for material lifts

These are the four mistakes we see most often at our counter, and how to avoid them.

  • Picking a lift that is too short. Measure to the bottom of the hangers or the ceiling where the load has to go, and choose a lift that reaches past it with room to spare. A lift that stops a foot short means a second trip to the yard.
  • Mixing up a duct lift and a material lift. A duct lift's wide cradle is made for long runs of round or square duct. Pipe bundles, unit heaters, fan coils and boxed equipment belong on a fork style material lift. Tell us what you are lifting and we will match the lift.
  • Overloading it. Weigh the load before you book and check it against the lift's capacity: 350 lb for the Genie GL lifts, 450 lb for the Sumner Series 2400, 650 to 1,000 lb for the bigger Sumner fork lifts, 1,500 lb for the Roust-A-Bout. Capacity drops if the load sits far out on the forks.
  • Not planning how it gets to the job. Most of our material lifts fit in a pickup truck or van when stowed, but measure your truck bed or cargo area first, and bring a second person to help load. Then check every door, hallway and freight elevator between the street and the work area. Many Manhattan buildings need an elevator reservation and a certificate of insurance before equipment comes in.

On site, set the lift up on a firm, level floor, lock the casters and set the outriggers or stabilizer legs before you raise a load, and lower it before you move the lift.

Material lift rental in NYC: pickup or delivery

Most of our material lifts fit in a pickup truck or van when stowed, and we help you load them at our yard at 181 2nd Ave, Brooklyn. The ones over 300 lb (the Sumner 2015, 2020 and 2025, the SLC-18 duct lift, the Series 2500 and the Roust-A-Bout) are easier with a ramp or liftgate, or we can deliver. The Series 2400 is the easiest to carry: it stows 5 ft 3 in tall and fits most vans and SUVs. We deliver to Brooklyn, Manhattan, Queens, the Bronx and Staten Island. We rent by the day, week or month, and a month is a 4-week (28-day) rental.

What to tell us before pickup or delivery

  • What you are lifting and how much it weighs.
  • The ceiling or hanger height the load has to reach.
  • The vehicle you are picking up with, or the delivery address and date.
  • The door, hallway and elevator sizes the lift must pass through.

Ready to book? Send us this list and we will match the lift. Call 718-344-1474 or request a quote.

Material lift rental FAQs

What is the difference between a duct lift and a material lift?

A duct lift has a wide cradle that holds long, light runs of round or square duct. A material lift has forks for heavier, compact loads like pipe bundles, unit heaters and fan coils. Our Genie SLC-18 is a duct lift; the Sumner 2000 lifts are fork style material lifts.

How high does a material lift go?

Our material lifts reach from 11 ft 8 in (Genie GL-10) to about 25 ft (Sumner 2025 with the forks up, Series 2500 and Roust-A-Bout R-250).

How much weight can a material lift hold?

The Genie GL-10 and GL-12 carry 350 lb, the Sumner Series 2400 450 lb, the Genie SLC-18 650 lb, the Sumner 2015 and 2020 800 lb, the Sumner 2025 650 lb, the Series 2500 650 to 1,000 lb and the Roust-A-Bout 1,500 lb.

Can I lift drywall with a material lift?

For hanging full sheets on a ceiling, use our 12 ft drywall lift. It holds the sheet flat over your head and tilts for high walls and sloped ceilings, so one person can hang sheets that usually take two or three.

Does a material lift need power?

No. Our Genie and Sumner material lifts are raised with a hand winch, so they work anywhere, even with no power on site.

Will a material lift fit in my van?

Most of them, yes, and we help you load at the yard. See pickup or delivery above for which ones are easiest to carry.

Do you set up the lift?

No, it is a rental only. We show you how the lift works at pickup or delivery, and your crew sets it up and runs it.

Can you deliver a material lift to Manhattan?

Yes, to all five NYC boroughs, often the same day or the next day when the lift is available. Tell us the building rules and the delivery window.

Related equipment and guides

Renting in Brooklyn since 2000

What our customers say

on Google · 28 reviews
  • “We use them seasonally for a scissor lift to get to a 2nd story planter in the middle of Times Square. The work must be done on the weekend and they are very accommodating with drop off and pickup.”

    Sam K. · Scissor lift, Times SquareGoogle review
  • “I was unsure about renting, but this company made it so easy! The staff was patient and walked me through everything. The equipment was clean and worked perfectly.”

    NC · First-time renterGoogle review
  • “Number 1 to get generators and lifts. We rent all our tools from here.”

    Ismael R. · All Boro PlumbingGoogle review