Demolition Hammers Rental in Brooklyn & NYC

Rent a demolition hammer or breaker in Brooklyn or anywhere in NYC: electric Bosch SDS-max hammers, a 63 lb Bosch breaker, 60 and 90 lb pneumatic pavement breakers and a rivet buster. Moil points and narrow chisels for air and Bosch Brute breakers are in stock to buy. We deliver to all five boroughs. Call 718-344-1474 or request a quote.

Showing all 10 results

Demolition hammers compared

Heavier tools break thicker concrete but are harder to hold. Tap a model for full details.

ToolClassPowerWeightBest for
Bosch 11264EVS SDS-max combination hammerLightElectric, 13 A, 6.5 ft-lb impact15.2 lbDrilling and light chiseling in concrete and masonry
Bosch 11316EVS SDS-max demolition hammerMediumElectric, 14 A, 900 to 1,890 bpm22.5 lbTile and mortar removal, light concrete, chasing
Rivet buster, 30 lbMediumSee page30 lbChipping, scaling and demolition of thin or brittle material
Sullair MPB-60A pavement breaker, 60 lb classHeavyCompressed air, about 48 cfm, 1,360 bpm69 lbSlabs, footings, sidewalks
Bosch breaker hammerHeavyElectric, 35 ft-lb impact63 lbFoundation work, pipe laying, pavement
Pneumatic pavement breaker, 90 lbHeaviestCompressed air90 lbThick concrete and asphalt

Which demolition hammer do I need?

  • Light jobs: removing tile, mortar and thin screeds, or chiseling small areas, calls for an electric SDS-max hammer.
  • Slabs and footings: a 60 lb class breaker, electric or pneumatic, breaks 4 to 8 in of concrete and is easier to manage than the 90 lb class.
  • Thick pavement and heavy concrete: use a 90 lb pneumatic breaker. It is the heaviest we rent and needs a lot of air.
  • Air or electric: pneumatic breakers need a compressor sized for the tool; see how many CFM you need and our air compressors. Electric hammers need only a generator or an outlet that can supply the amps.
  • Breaker steel: a moil point breaks and starts holes; a narrow chisel chips, edges and trims. Air breakers take 1-1/4″ hex steel and the Bosch Brute takes 1-1/8″ hex. See breaker steel in stock below.

Questions about a tool? We can send specs and check availability and delivery. Call 718-344-1474 or request a quote.

Breaker steel in stock

Moil points and narrow chisels for sale at our Brooklyn yard. Check your hammer first: the two shank sizes do not swap. Measure across the flats if unsure.

PartShankLengthFitsPrice
Moil point, air1-1/4″ hex x 6″ with collar14″ working60 to 90 lb air paving breakers$99.16
Narrow chisel, air1-1/4″ hex x 6″ with collar14″ working60 to 90 lb air paving breakers$99.16
Moil point, electric1-1/8″ hex with notch20-1/2″ overallBosch Brute and 1-1/8″ hex breakers$88.07
Narrow chisel, electric1-1/8″ hex with notch20-1/2″ overallBosch Brute and 1-1/8″ hex breakers$88.07

Demolition safety and silica dust

Breaking concrete releases silica dust. Use water or dust control, a respirator, eye and hearing protection and gloves. See the OSHA guidance on silica dust. Check for rebar, utilities and conduit before you break.

Renting a demolition hammer in NYC

We rent by the day, week or month and deliver to all five boroughs, or you can pick up at 181 2nd Ave, Brooklyn.

Demolition hammer rental FAQs

What size breaker do I need to break a concrete slab?

A 60 lb class breaker handles most residential and sidewalk slabs. Thicker or reinforced concrete may need the 90 lb. Compare the weights and uses in the table above.

Do I need a compressor?

Only for the pneumatic breakers. The Sullair MPB-60A uses about 48 cfm at 90 psi through a 3/4 in hose. The electric Bosch tools plug in, but check the amps.

What is the difference between a rotary hammer and a demolition hammer?

A rotary hammer drills holes and also chisels lightly. A demolition hammer only chisels and is built for breaking material.

Which breaker steel fits my hammer?

Measure across the flats of the shank. 1-1/4″ hex with a 6″ shank and collar fits air paving breakers like our 60 and 90 lb models. 1-1/8″ hex with a notch fits electric breakers like the Bosch Brute. The two sizes do not swap.

Moil point or chisel?

A moil point is for breaking slabs, footings and pavement and starting holes. A narrow chisel is for chipping concrete and masonry, cutting edges and trimming along walls and curbs.

Do you deliver?

Yes, to all five NYC boroughs.

Related equipment and guides