26 ft Scissor Lift (Genie GS-2632) Rental in Brooklyn, NYC
The Genie GS-2632 lifts the platform to 26 ft for a working height of about 32 ft, but it is still only 32 inches wide. It is the lift most crews pick for warehouse aisles, school gyms and office ceilings that are too high for a 19 ft lift. It runs on batteries with no fumes.
Genie GS-2632 specifications
Specifications from the manufacturer’s Genie GS-2632 page.
Good jobs for the GS-2632
- Drop ceilings, ductwork and sprinkler pipe at 20 to 30 ft
- Warehouse racking, lighting and signage
- Painting gyms, churches and lobbies
- Electrical and low voltage cable runs
Will the GS-2632 fit your job?
The GS-2632 is 2 ft 8 in wide and 8 ft long, so it goes through a standard 36 inch door but needs room to turn in a hallway. It weighs 4,729 lb, so a freight elevator and a solid slab floor are a must. The 36 inch roll-out deck lets you reach past shelving or ductwork. For ceilings up to about 38 ft through the same door, see the GS-3232. All sizes are on our scissor lift rental in NYC page.
Rental Details
GS-2632 rental questions
What height can I reach with the GS-2632?
The platform goes to 26 ft, and the working height is about 32 ft. Outdoors, Genie limits the working height to 25 ft because of wind.
Will it fit through a standard door?
Yes. It is 32 inches wide, so a standard 36 inch door works. Check corners and hallway turns, since the lift is 8 ft long.
How many people can ride on it?
The platform holds 500 lb, which is usually two workers with hand tools. Count tools and material in that weight.
GS-2632 or GS-3232?
If your ceiling is under about 30 ft, the GS-2632 is lighter and easier to move. For ceilings up to about 38 ft, the same-width GS-3232 gets you there.
