19 ft Scissor Lift (Genie GS-1930) Rental in Brooklyn, NYC
The Genie GS-1930 is the smallest electric scissor lift we rent. It lifts one or two workers to a 19 ft platform, so you can work at about 25 ft, and it is only 30 inches wide. It runs on batteries, so it is quiet and safe to use inside occupied buildings.
Genie GS-1930 specifications
Specifications from the Genie GS-1930 product specifications.
Good jobs for the GS-1930
- Ceiling tile, lighting and sprinkler work in offices, stores and schools
- Painting, drywall finishing and trim on high walls
- Hanging signs, cameras and Wi-Fi access points
- Store fit-outs where the lift has to move between aisles
Will the GS-1930 fit your job?
At 2 ft 6 in wide and 6 ft long, the GS-1930 rolls through a standard 36 inch door and turns in place. Folding the guardrails brings it down to 5 ft 11 in tall. It weighs 3,209 lb, so check the freight elevator capacity and any floor load limits before delivery. Need more height? See the 26 ft GS-2632, or compare all our lifts on the scissor lift rental in NYC page.
Rental Details
GS-1930 rental questions
Can I take it in an elevator?
Only a freight elevator rated for its weight. The GS-1930 weighs 3,209 lb, which is more than most passenger elevators can carry. Send us the elevator capacity and car size and we will check it.
Can I use it outside?
Yes, on firm, level ground. Outdoors the platform height is limited to 14 ft 8 in because of wind, so for higher outdoor work look at a rough terrain lift.
Is it hard to drive?
No. One joystick drives and lifts, and it turns in its own length. Our lift controls guide shows the controls, and we go over them at pickup or delivery.








