Lull 1044C-54 Telescopic Forklift (JLG) Rental in Brooklyn, NYC
The Lull 1044C-54 is a telescopic forklift that lifts 10,000 lb to 54 ft and reaches 45 ft forward. In NYC, “Lull” is the everyday word for any telehandler, after this brand. Its boom rides on a carriage that slides forward 80 in without moving the machine, so you can place a load on a slab edge with the wheels parked.
Lull 1044C-54 specifications
Specifications are from the manufacturer and may vary by configuration. Call to confirm for your job.
Download the Lull Rental 1044C-54 Telescopic Forklift spec sheet (PDF)
Good jobs for the Lull 1044C-54
- Placing heavy pallets of block and stone on upper floors
- Setting steel, rebar bundles and formwork
- Landing loads through window openings and onto slab edges
- Rough lots where a standard forklift cannot drive
Will the Lull 1044C-54 fit your job?
The 1044C-54 weighs 32,697 lb, so it needs firm ground and a solid route on and off the truck. The sliding boom carriage helps on sites where you cannot drive closer to the building. A 115 hp John Deere 4045TF diesel powers it. For lighter loads, see the JLG G9-43A or G6-42A, or our Lull and telehandler rental in NYC page.
Rental Details
Lull 1044C-54 rental questions
What is a Lull?
A Lull is a telescopic forklift, also called a telehandler. It extends a boom up and out instead of lifting straight up. Our telehandler vs forklift guide explains the difference.
How much does the Lull 1044C-54 lift?
10,000 lb close in, and loads to 54 ft high and 45 ft forward. Capacity drops as the boom extends, so check the load chart.
What does the sliding boom do?
The whole boom slides forward 80 in on rails, so you can move a load toward the building without moving the wheels. Stowed and rolled fully forward, the load is 88 in in front of the outriggers.
Who can drive it?
A trained, evaluated operator under OSHA forklift training rules. We go over the controls at delivery.








