JLG G9-43A Telehandler Rental in Brooklyn, NYC
The JLG G9-43A telehandler lifts up to 9,000 lb, reaches 43 ft up and 30 ft 5 in out. It is the middle size in our telehandler fleet, with more capacity than the G6-42A for heavy pallets, steel and block.
JLG G9-43A specifications
Download the Telehandler JLG G9-43A spec sheet (PDF)
Good jobs for the G9-43A
- Lifting heavy pallets of block, brick and stone
- Setting steel, trusses and roofing
- Unloading flatbeds on rough ground
- Feeding material to upper floors and roofs
Will the G9-43A fit your job?
The G9-43A needs firm ground and room to swing the boom. Tell us the site layout, the ground and the heaviest load. For lighter loads on a tight lot, the JLG G6-42A is smaller. For more height and reach, see the Lull 1044C-54. Compare all of them on our Lull and telehandler rental in NYC page. Not sure you need a telehandler? Read our telehandler vs forklift guide.
Rental Details
G9-43A rental questions
How much does the G9-43A lift?
Up to 9,000 lb close in. Capacity drops as you raise and extend the boom, so check the load chart.
How high and far does it reach?
43 ft up and 30 ft 5 in forward.
G9-43A or a Lull?
The Lull 1044C-54 lifts 10,000 lb to 54 ft and can slide its boom forward without moving the machine. The G9-43A is the simpler pick for loads up to 9,000 lb and 43 ft.
Do operators need training?
Yes. Telehandler operators need training and an evaluation under OSHA forklift training rules.





