12 in Diamond Core Bit Rental in Brooklyn, NYC
The 12 in diamond core bit cuts a round hole about 12 in across through concrete, block, brick and stone on a core drill. It has 20 diamond teeth and a 15 3/4 in overall length. Rent it from our Brooklyn yard at 181 2nd Ave, or have it delivered with your drill anywhere in the five boroughs. Call 718-344-1474.
12 in core bit for boiler room combustion air after a boiler upgrade
A six-family building in the Bronx is replacing an old No. 4 oil burner, a fuel NYC is phasing out by 2030. Its new boiler needs a steady supply of outside air to burn cleanly, so the engineer sizes a combustion air opening for the boiler room under the NYC code. Here that is a 10 in round duct through the foundation wall. A 12 in core leaves about 1 in from the duct to the concrete on each side for the sleeve and sealant.
Rig: 12 in is the largest size we rent, and it runs on the 36 in core drill rig. Plan on water, a wet vac and more than one person for a hole this size.
Is 12 in the right size?
Measure the outside of the pipe, duct or sleeve that has to fit, not the size printed on it. Then leave room for sealant, grout or firestop around it. In the job above, that works out to about 1 in each side between the duct and the wall.
- Smaller pipe or duct? Try the 10 in diamond core bit. Its usual job: makeup air for a small cafe hood (8 in round duct plus sleeve).
- See every size and what it fits in our core bit size chart.
Specifications and Features
Rental Details
Which drill: a bit this size runs on the 36 in core drill rig, which drills 1 in to 12 in holes. Rent the bit and rig together and we will check that they fit.
Drill wet. Keep water running to cool the bit and keep silica dust down, and read the OSHA guidance on crystalline silica before you start. Scan slabs for rebar, conduit and post-tension cables before you core a floor.




