10 in Diamond Core Bit Rental in Brooklyn, NYC
The 10 in diamond core bit cuts a round hole about 10 in across through concrete, block, brick and stone on a core drill. It has 18 diamond teeth and a 15 3/4 in overall length. Rent it from our Brooklyn yard at 181 2nd Ave, or have it delivered with your drill anywhere in the five boroughs. Call 718-344-1474.
10 in core bit for makeup air for a small cafe hood
A small Williamsburg cafe has a hood that pulls more air out than the room can replace. The doors whistle and the hood stops drawing well. The fix is a makeup air duct that brings fresh air in through the brick side wall. An 8 in round duct suits a small hood like this one, and it goes through a sleeve with sealant around it. A 10 in core leaves about 1 in from the duct to the brick on each side, and the sleeve wall takes part of that.
Before you core: Commercial kitchen ventilation in NYC is designed by an engineer and filed with the Department of Buildings, and bigger hoods need bigger ducts. Get the duct and sleeve size from the drawings. Use the 36 in core drill rig for 10 in holes. It drills from 1 in up to 12 in.
Is 10 in the right size?
Measure the outside of the pipe, duct or sleeve that has to fit, not the size printed on it. Then leave room for sealant, grout or firestop around it. In the job above, that works out to about 1 in each side between the duct and the wall.
- Bigger pipe or duct? Try the 12 in diamond core bit. Its usual job: boiler room combustion air after a boiler upgrade (10 in round duct plus sleeve).
- Smaller pipe or duct? Try the 8 in diamond core bit. Its usual job: yard storm drain through a foundation (6 in PVC, 6.625 in OD).
- See every size and what it fits in our core bit size chart.
Specifications and Features
Rental Details
Which drill: a bit this size runs on the 36 in core drill rig, which drills 1 in to 12 in holes. Rent the bit and rig together and we will check that they fit.
Drill wet. Keep water running to cool the bit and keep silica dust down, and read the OSHA guidance on crystalline silica before you start. Scan slabs for rebar, conduit and post-tension cables before you core a floor.




