1 in Diamond Core Bit Rental in Brooklyn, NYC
The 1 in diamond core bit cuts a round hole about 1 in across through concrete, block, brick and stone on a core drill. It has 3 diamond teeth and a 15 3/4 in overall length. Rent it from our Brooklyn yard at 181 2nd Ave, or have it delivered with your drill anywhere in the five boroughs. Call 718-344-1474.
1 in core bit for a porch light or camera on a brick front
A Carroll Gardens brownstone owner wants a security camera and a new porch light by the front door. The electrician brings 1/2 in EMT conduit out from the vestibule wall to an outdoor box. 1/2 in EMT measures 0.706 in on the outside, so a 1 in core leaves about 5/32 in all around. That is enough to slide the conduit through and close the gap with exterior sealant, and small enough that there is almost nothing to patch on the face of the brick.
Why not a hammer drill? A hammer bit wanders and blows out the back face of old brick. A core bit cuts a clean round hole through all three layers of a 12 in brick wall.
Is 1 in the right size?
Measure the outside of the pipe, duct or sleeve that has to fit, not the size printed on it. Then leave room for sealant, grout or firestop around it. In the job above, that works out to about 5/32 in each side.
- Bigger pipe or duct? Try the 1 1/4 in diamond core bit. Its usual job: AC condensate drain through a concrete wall (3/4 in PVC, 1.050 in OD).
- See every size and what it fits in our core bit size chart.
Specifications and Features
Rental Details
Which drill: this size runs on the EDCO handheld core drill for walls and tight spots, or on a 36 in core drill rig for floors. Already have a drill? Tell us the model when you request a quote and we will check that the bit fits it.
Drill wet. Keep water running to cool the bit and keep silica dust down, and read the OSHA guidance on crystalline silica before you start. Scan slabs for rebar, conduit and post-tension cables before you core a floor.





