3 in Diamond Core Bit Rental in Brooklyn, NYC
The 3 in diamond core bit cuts a round hole about 3 in across through concrete, block, brick and stone on a core drill. It has 6 diamond teeth and a 15 3/4 in overall length. Rent it from our Brooklyn yard at 181 2nd Ave, or have it delivered with your drill anywhere in the five boroughs. Call 718-344-1474.
3 in core bit for a water line through a brick cellar wall
A Crown Heights mixed-use building is running a bigger water line from the meter to a new storefront tenant, and it has to pass through the old brick wall that divides the cellar. The plumber runs 2 1/2 in Type L copper, which measures 2.625 in on the outside. A 3 in core leaves about 3/16 in each side, enough to wrap the copper where it passes through the masonry so it can expand and will not corrode against the brick.
Tip: Copper sizes are not the same as steel pipe sizes. 2 1/2 in steel pipe is 2.875 in on the outside and would be too tight in a 3 in hole for wrapping. Always measure the pipe you are installing.
Is 3 in the right size?
Measure the outside of the pipe, duct or sleeve that has to fit, not the size printed on it. Then leave room for sealant, grout or firestop around it. In the job above, that works out to about 3/16 in each side.
- Bigger pipe or duct? Try the 3 1/2 in diamond core bit. Its usual job: small bathroom exhaust fan (3 in round duct).
- Smaller pipe or duct? Try the 2 3/4 in diamond core bit. Its usual job: ductless mini-split line set (line set, drain and cable bundle in a wall sleeve).
- See every size and what it fits in our core bit size chart.
Specifications and Features
Rental Details
Which drill: this size runs on the EDCO handheld core drill for walls and tight spots, or on a 36 in core drill rig for floors. Already have a drill? Tell us the model when you request a quote and we will check that the bit fits it.
Drill wet. Keep water running to cool the bit and keep silica dust down, and read the OSHA guidance on crystalline silica before you start. Scan slabs for rebar, conduit and post-tension cables before you core a floor.





