5 in Diamond Core Bit

A 5 in diamond core bit with 10 teeth and a 15 3/4 in overall length. A common job for this size: waste stack through a floor slab.

Call 718-344-1474 or request a quote. Delivery to all five NYC boroughs.

5 in Diamond Core Bit Rental in Brooklyn, NYC

The 5 in diamond core bit cuts a round hole about 5 in across through concrete, block, brick and stone on a core drill. It has 10 diamond teeth and a 15 3/4 in overall length. Rent it from our Brooklyn yard at 181 2nd Ave, or have it delivered with your drill anywhere in the five boroughs. Call 718-344-1474.

5 in core bit for a waste stack through a floor slab

In a Manhattan gut renovation, the bathrooms are moving, and a new 4 in waste stack has to drop through the 8 in concrete floor slab. 4 in no-hub cast iron measures 4.38 in on the outside. A 5 in core leaves about 5/16 in each side for the firestop sealant that keeps the floor’s fire rating.

Before you core a slab: Have it scanned with GPR or X-ray first. Rebar, conduit and post-tension cables run through slabs, and cutting a tensioned cable is dangerous and expensive. Also plan the pipe so no coupling sits inside the slab, since couplings are wider than the pipe.

Is 5 in the right size?

Measure the outside of the pipe, duct or sleeve that has to fit, not the size printed on it. Then leave room for sealant, grout or firestop around it. In the job above, that works out to about 5/16 in each side.

  • Bigger pipe or duct? Try the 6 in diamond core bit. Its usual job: water service sleeve through a foundation (3 in ductile iron in a 5 in steel sleeve, 5.563 in OD).
  • Smaller pipe or duct? Try the 4 1/2 in diamond core bit. Its usual job: dryer vent (4 in rigid metal duct).
  • See every size and what it fits in our core bit size chart.

Specifications and Features

Bit size5 in
Overall length15 3/4 in
Number of teeth10
TypeDiamond core bit

Rental Details

Equipment typeCore Drill
Rental periodsDaily, weekly, monthly
Pickup181 2nd Ave, Brooklyn, NY 11215
DeliveryAll five NYC boroughs
RatesCall 718-344-1474
AvailabilityCall or request a quote
Ready to rent the 5 in Diamond Core Bit?Call 718-344-1474 or request a quote

Which drill: for a bit this size, use a 36 in core drill rig or the 48 in EDCO rig (up to 8 in) for straight holes in slabs and thick walls. Already have a drill? Tell us the model when you request a quote and we will check that the bit fits it.

Drill wet. Keep water running to cool the bit and keep silica dust down, and read the OSHA guidance on crystalline silica before you start. Scan slabs for rebar, conduit and post-tension cables before you core a floor.

5 in Diamond Core Bit delivery in NYC

We deliver from our yard at 181 2nd Ave, Brooklyn, to job sites in all five boroughs. Call 718-344-1474 or request a quote.

Also delivering to

Renting in Brooklyn since 2000

What our customers say

on Google · 28 reviews
  • “We use them seasonally for a scissor lift to get to a 2nd story planter in the middle of Times Square. The work must be done on the weekend and they are very accommodating with drop off and pickup.”

    Sam K. · Scissor lift, Times SquareGoogle review
  • “I was unsure about renting, but this company made it so easy! The staff was patient and walked me through everything. The equipment was clean and worked perfectly.”

    NC · First-time renterGoogle review
  • “Number 1 to get generators and lifts. We rent all our tools from here.”

    Ismael R. · All Boro PlumbingGoogle review