3 1/2 in Diamond Core Bit Rental in Brooklyn, NYC
The 3 1/2 in diamond core bit cuts a round hole about 3 1/2 in across through concrete, block, brick and stone on a core drill. It has 6 diamond teeth and a 15 3/4 in overall length. Rent it from our Brooklyn yard at 181 2nd Ave, or have it delivered with your drill anywhere in the five boroughs. Call 718-344-1474.
3 1/2 in core bit for a small bathroom exhaust fan
A Bed-Stuy brownstone bathroom renovation adds a small exhaust fan, and its 3 in round duct has to go out through the rear brick wall to a wall cap. A 3 1/2 in core leaves about 1/4 in around the duct for mortar or sealant behind the cap flange. A bathroom fan has to vent outside, not into the ceiling or the wall, or the moisture just moves somewhere else. Many larger fans take 4 in duct instead, and those need the 4 1/2 in bit.
Thick walls: Rear walls in older brownstones can be 12 to 16 in thick. If yours is deeper than the bit, add a 6 in core bit extension.
Is 3 1/2 in the right size?
Measure the outside of the pipe, duct or sleeve that has to fit, not the size printed on it. Then leave room for sealant, grout or firestop around it. In the job above, that works out to about 1/4 in each side.
- Bigger pipe or duct? Try the 4 in diamond core bit. Its usual job: concrete test core for an engineer (takes out a core just under 4 in across).
- Smaller pipe or duct? Try the 3 in diamond core bit. Its usual job: water line through a brick cellar wall (2 1/2 in Type L copper, 2.625 in OD).
- See every size and what it fits in our core bit size chart.
Specifications and Features
Rental Details
Which drill: this size runs on the EDCO handheld core drill for walls and tight spots, or on a 36 in core drill rig for floors. Already have a drill? Tell us the model when you request a quote and we will check that the bit fits it.
Drill wet. Keep water running to cool the bit and keep silica dust down, and read the OSHA guidance on crystalline silica before you start. Scan slabs for rebar, conduit and post-tension cables before you core a floor.






